Test weight, thickness (or height), diameter (or length), and hardness of regular tablets, odd shaped tablets (caplets, oblongs etc.) and other solid samples fully automatically. Use the WHT 4 for the fully automated testing of single tablet critical parameters including weight (in compliance to the European and German Pharmacopoeia for uniformity of mass), thickness, diameter and the tablet hardness also according to the European EP <2.9.8> and USP <1217> Pharmacopoeia.

• Tablet hardness testing in full compliance to USP <1217> and EP <2.9.8> Pharmacopeia
• 4 results of the same sample: thickness, diameter, hardness and weight (via internal balance)
• Complete system of instrument, PC and software
• Dual force mode instrument with linear speed increase and linear force increase modes
• Multiple point validation procedure for all measurement stations built-in

• Number of Testing Stations: 4 (Hardness, Thickness, Diameter and Weight)
• Hardness Testing Range: 5.0 – 500.0N (optional 2.0 – 300.0N, 5.0 – 1.000N)
• Hardness Accuracy: Better than 1N
• Thickness Testing Range: 2.00 – 15.00mm
• Thickness Accuracy: Better than ±0.02mm
• Diameter Testing Range: 2.00 – 30.00mm
• Diameter Accuracy: Better than ±0.02mm
• Weight Measurement: By internal Sartorius balance cell
• Weight Testing Range: 0.0001g – 200.0000g
• Weight Accuracy: 0.1mg
• Force Mode: Selectable between linear force increase and constant speed
• Force Rate: linear force 5 – 250 N/sec. (linear force increase)
• Force Rate: constant speed 5 – 250 mm/Min. (constant speed)
• Industrial PC (IPC): Integrated high resolution color touch screen PC
• Sample Handling: Semi- or fully automated using single or multi-batch feeder
• Testing Speed: 10 to 15 tests per minute depending on sample hardness
• Flap Control: Flap speed and opening angle steplessly adjustable
• Number of Tests: Up to 250 tests in one test run